L1373 Whirlpool Repair Kit – Original Components

L1373 Whirlpool Repair Kit – Original Components

0 out of 5


Availability: In stock SKU: RE-6050 Category:
Quantity discounts
1 2-5 6+
 9,95  8,46  7,96
    • 49.95 €


L1373 L1790 L2158 L2524 L1782 L1799 …. and more

The best repair kit for this washing machine PCB from Whirlpool, Zanker, AEG Lavatherm, Elektrolux, Privileg and other.

We sell only original electronic products directly from original manufacturer.

So, no cheap false / counterfeit products. This is very important for a safe machine to work after repair. A lot of sellers sell counterfeit products, we don’t ! (think about fire and so on, when you install false / counterfeit components)

  • This repair kit is an update from the original PCB components
  • The symptoms of a defective washing machine are that it won’t function at all and / or the display is dead
  • Due to a manufacturer fault on this PCB the IC LNK304PN is running on his limits and after a “few years” it will internally burn out
  • With this new electronic components, the IC LNK304PN is not running anymore on his limits and wont again internally burn out

We provide a solder service for this PCB. You send us the PCB, we repair it and send it back to you. Contact us when you order this service. You must ship the PCB to the Netherlands.

Package include:

  • 1 x AC/DC Converter LNK304PN
  • 1 x Inductor 470uH 
  • 1 x Resistor 47R (Ohm) / 3W 

Packed in a ESD safe bag.

Repair info:


  • Cut the seven IC pins from the LNK304PN
  • Desolder the reaming pins from the PCB
  • Cut the resistor pins. (R020)
  • Desolder the two reaming pins from the PCB
  • Cut the inductor pins. (L003)
  • Desolder the two reaming pins from the PCB

Clean all the PCB holes and place the new components inside the holes.

Solder all new pins.

Additional information

Weight30 g
Dimensions30 × 20 × 10 mm