PCB Rivet / Eyelet Tool – Pin

PCB Rivet / Eyelet Tool – Pin

0 out of 5

 7,95

Clear
  • Description
  • Additional information

Description

PCB Rivet Eyelet Tool / Pin

We ship this tools in a plastic tube for safe shipping.

  • Hit with a small hammer carefully on top of this pin. Take care for a hard underground !
  • Do not bend this tool when it’s in the rivet.
  • Always keep this tool strait up.
  • If do so, then you have a great tool.
  • Always place the rivets first on the PCB and then the components.

We have done some hundreds of rivets with this tools and have no problem at all.

Placement of an Rivet / Eyelet is easy
especially when using our tools


The pictures below are demo pictures and show
Type B Ø 0.6 x 0.8 mm (± 23 x 31 mil)
1 Place Rivet / Eyelet
Use our tool or a tweezer to place the rivet.
2 Turn PCB
If the hole is bigger than the rivet than use some
Scotch tape to keep the rivet in place.
3 Use one of this tools
You can buy this tools in our store.

 

Additional information

Weight10 g
Dimensions30 × 3 mm
Rivet Tool Dimension

Rivet Tool for Type A Rivets (0.4), Rivet Tool for Type B Rivets (0.6), Rivet Tool for Type C Rivets (0.8), Rivet Tool for Type D Rivets (1.0), Rivet Tool for Type E Rivets (1.2), Rivet Tool for Type F Rivets (1.5)