RE-0260 – Flash LED Driver Module for Actieframe / Traffic warning lights

RE-0260 – Flash LED Driver Module for Actieframe / Traffic warning lights

0 out of 5

 24,95

Choose the right mA output.
See below for more information
If the desired mA is not in the list, than please contact us.

SKU: RE-0260 Category:
Quantity discounts
1-2 3-4 5+
 24,95  23,70  22,46
Clear
  • Description
  • Additional information

Description

RE-0260 – Flash LED Driver Module for Actieframe / Traffic warning lights

Click here for a module connection diagram

Making use of LED Drivers for Flash Lights is more powerful than regular resistors for the LEDs. The current output of a LED Driver guarantees that the LEDs will be brighten at their maximum.

  • LED Driver for traffic / warning High Power LED Lamps or LED Bulbs
  • Direct steering from a Microcontroller output (5V) or from a NPN MOSFET / Transistor (GND)

Features:

  • 1 LED Driver for High Power LEDs
  • Input power:  12-24V
  • 300mA to 1000mA per channel
  • Direct steering from a Microcontroller output (5V) or from a NPN MOSFET / Transistor (GND)
  • 4 Mounting holes 3.2mm

Dimensions:

  • 25 x 88 x 16 mm (1 PCB)
  • 50 x 88 x 16 mm (2 PCB’s)
  • 75 x 88 x 16 mm (3 PCB’s)
  • 100 x 88 x 16 mm (4 PCB’s – is one board)
  • 2, 3 or 4 PCB’s are easily to separate through V-CUT lines

An LED driver is an electrical device which regulates the power to an LED or a string of LEDs. An LED driver responds to the changing needs of the LED, or LED circuit, by providing a constant quantity of Current to the LED.

For ordering this LED Drivers you must know the mA from the LEDs which are going to be connected to this LED Driver. You cannot use LED Lamps which have already installed some resistor’s or other power regulators. You can only use normal LEDs.

The benefit of making use of a LED driver for this kind of lamps is that there is always a maximum current what the LEDs can have. So there is always the maximum light (lumen) from the LED. A LED needs current and then voltage.

Example:
In this example is an LED with the following specifications (Specs)
3V / 350mA (giving this LED the maximum of 350mA is not a good idea but 333mA is a much more saver)

One LED   
VoltageCurrent mAMax mA Output by LED DriverInput voltage LED Driver
3Volt350mA333mA12-24Volt
Two LEDs in series, or more LEDs
3Volt350mA333mA12-24Volt
3Volt350mA333mA12-24Volt
Total
6Volt350mA333mA12-24Volt
Volt has doubled to 6VoltmA will be still the sameLED Driver output mA will be still the sameInput voltage is enough for 6Volt

 

Typical connections

 

*

Additional information

Weight20 g
Dimensions88 × 25 × 13 mm
LED Driver mA

1000mA, 833mA, 666mA, 333mA