- Additional information
Two Channel High Power LED Flasher with Programmable PIC12F675
This LED Flasher can be used for all kinds of applications such as:
- Priority and Emergency Vehicles, etc.
- RC Car, Boat, Airplane, Drone, etc.
- Attention Grabber for Shops, Displays, Trade Shows, etc.
- Alarm Systems, etc.
- And much more
All kinds of LEDs can be used:
- Normal low current LEDs
- High Power LEDs
- LED Strips
- And much more
This LED flasher is delivered with preprogrammed software for flashing the LEDs and has seven LED flash patterns (effects). With the potentiometer you can change the flash speed of the LEDs on every pattern. The switch is used for chancing to the next flash pattern.
You can make your own flash software and upload this to the microcontroller on this unit. The microcontroller is a PIC12F675 and the program connector is a standard (Microchip) ICSP pin header.
- Power input: 12V DC
- Output per channel: Max 4A (High Power Mosfets)
- Seven programmed Flash Patterns
- Switch for selecting the next Flash Pattern
- Potentiometer for regulating the flash speed
- Microcontroller: PIC12F675
- Program interface: ICSP
- Cutting off the both left and right LED boards (Option)
This unit is standard delivered without LED’s and resistors. You can order as an option the LEDs and resistors. We deliver the right resistors for the LEDs for 12V.
Option LED kit:
The LED kits are delivered with 12 Water Clear LED’s per color and 4 series resistors for 12V.
Option cut LED board:
The LED boards on the left and right side can be cut off and placed somewhere else. We can cut off this boards for you. You must select this option.
Detailed documentation and instructions are delivered with this kit.
Download the standard firmware for this LED Flasher: Download RE-0141 V1.0
This is a DIY KIT you have to solder all the components.
|Dimensions||100 × 50 × 10 mm|