Developer for Photoresist PCB. (>99% pure)

Developer for Photoresist PCB. (>99% pure)

0 out of 5

 1,00 4,50

Clear
  • Description
  • Additional information

Description

Developer for Photoresist PCB. (>99% pure)

This developer is special made for developing photoresist PCB’s and is more than >99% pure.

  • Use exactly 10 grams for one liter water at 20 degrees Celcius.
  • Off course you can use 5 grams for 0.5 liter water.
  • The mixed solution is sustainable for more than four weeks. (store in a cool and dark place)

Lay the PCB in the mixed solution at 20 degree Celsius for ± 10 to 20 seconds and “shake” it a little bit. If there are no resolved “brown traces” to see from the PCB, than STOP and rinse the PCB with water to stop the developing process. Now you can etch your PCB.

Additional information

WeightN/A
Grams

10 grams, 50 grams